CDJMQ - AUTO DISPENSE FLUX

  • MSDS: CDJMQ
  • Manufacturer: JW HARRIS CO INC
  • Product Name: AUTO DISPENSE FLUX
  • National Stock Number: 3439-00N077148
Product Identification

Product ID:AUTO DISPENSE FLUX
MSDS Date:12/01/1995
FSC:3439
NIIN:00N077148
MSDS Number: CDJMQ

Responsible Party
JW HARRIS CO INC
10930 DEERFIELD RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 513-891-2000

Cage: HO350

Contractor
JW HARRIS CO INC
CINCINNATI, OH 45242 US

Telephone: 513-891-2000

Cage: HO350

Ingredients

POTASSIUM BORATE; (POTASSIUM TETRABORATE)

CAS: 1332-77-0

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)


POTASSIUM PENTABORATE

CAS: 11128-29-3

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)


BORIC ACID

CAS: 10043-35-3

RTECS: ED4550000

Fraction By Weight: 30-60%

OSHA PEL 10 MG BORATES/M3

ACGIH TLV: 5 MG BORATES/M3


POTASSIUM ACID FLUORIDE; (POTASSIUM BIFLUORIDE)

CAS: 7789-29-9

RTECS: TS6650000

Fraction By Weight: 25-40%

OSHA PEL 2.5 MG/M3 (MFR)

ACGIH TLV: 2.5 MG/M3 (MFR)


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 15-25%

OSHA PEL N/K

ACGIH TLV: N/K


MAY BE DIFFERENT IN PERCENT AND FORM FROM THE

RTECS: 9999999ZZ


SPARKS, & FLAME. AT A MINIMUM THIS INCL

RTECS: 9999999ZZ


APRONS, HATS, SHOULDER PROTECTION, AS WELL AS DARK

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: FUMES ARE IRRIT TO SKIN, EYES,
& RESP TRACT. FLUXES ARE USED W/BRAZING FILLER METALS. WHEN MELTED,
THESE FILLER METALS MAY PRDCE FUMES WHICH ARE HAZ. FILLER METALS
MAY CONTAIN CADMIUM. FUME GEN ERATED DURING BRAZING W/CADMIUM
ALLOYS MAY BE TOX. CONSULT MSDS THAT PERTAIN TO THESE PRODUCTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION: REMOVE FROM FUME EXPOSURE. IF BREATHING HAS
STOPPED, PERFORM ARTIFICIAL RESPIRATION. INGESTION: INDUCE
VOMITING. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERS.
SKIN: WASH WITH WATER. EYES: IMMEDIATELY FLUSH FOR AT LEAST 15
MINUTES WITH PLENTY OF WATER. GET MEDICAL AID IMMEDIATELY.

Fire Fighting

Extinguishing Media:NON-FLAMMABLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:OPEN FLAME AND SPARKS CAN IGNITE
COMBUSTIBLES.

Accidental Release

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:LARGE SPILLS SHOULD BE NEUTRALIZED WITH A SLAKED
LIME-SODA ASH SLURRY.

Handling

Handling and Storage Precautions:READ AND UNDERSTAND THE MANUFACTURER'S
INSTRUCTIONS AND THE PRECAUTIONARY LABEL ON THE PRODUCT.
Other Precautions:TRAIN THE EMPLOYEE TO KEEP HIS HEAD OUT OF THE FUMES.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN BRAZING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENTILATION TO KEEP FUMES BELOW TLV'S IN THE
WORKER'S BREATHING ZONE AND THE GENERAL AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR HEAD & BODY PROT WHICH HELP TO PVNT INJURY FROM RADIA, (ING 7)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD: PROC & FILLER METAL USED. OTHER CNDTNS WHICH ALSO
INFLUENCE COMPOSITION & QTY OF FUMES TO WHICH WORKERS MAY BE
EXPOSED INCL: COATINGS ON METAL BEING SOLDERED (SUCH AS PAINT,
PLATING/G ALVANIZING), AMT OF VENT & POSITION OF OPERATOR'S HEAD
W/RESPECT TO FUME. FUME COMPOSITION PRODS GENERATED (ING 6)

Chemical Properties

Spec Gravity:1.54
Solubility in Water:MODERATE
Appearance and Odor:SMOOTH WHITE PASTE WITH NO ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BRAZING FUMES CANNOT BE CLASSIFIED
SIMPLY. COMPOSITION & QTY ARE DEPENDENT UPON METAL BEING BRAZED,
PROCESS, (SUP DAT)

Disposal

Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS FOR
DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.